What to do if your cube falls apart
A popped piece, a full explosion or a lost spring: how to collect the parts, check for damage and reassemble the cube correctly.
First: do not panic
A cube coming apart is normal. Modern speedcubes are held together by tension, not glue, and pieces pop out when a turn is forced.
Nothing is broken unless a piece cracked or a screw stripped.
Step 1. Collect every piece
Count them:
| Cube | Corners | Edges | Centres |
|---|---|---|---|
| 3×3 | 8 | 12 | 6 |
| 4×4 | 8 | 24 | 24 |
If a piece is missing, the cube cannot be completed — check under the table before reassembling.
Step 2. Check for damage
- Cracked piece → replace it; a cracked corner will pop forever.
- Bent core → the cube will never turn evenly.
- Missing spring or screw → order a replacement set.
Step 3. Reassemble
- Keep the core with the six centres attached.
- Build one layer, pressing pieces in at an angle.
- Continue layer by layer.
- The last piece needs a firm push at 45°.
Full instructions: how to take a cube apart and reassemble it.
Step 4. Check the orientation
A cube reassembled with one flipped edge or one twisted corner will never solve. Place every piece with its colours matching the adjacent centres.
If the cube still will not solve, take it apart again — the mistake is orientation, not the method.
If only one piece popped
- Turn the surrounding face 45°.
- Insert the piece at an angle.
- Push until it clicks.
- Turn the face to check.
Prevention
- Do not force a turn when the cube locks.
- Keep tension reasonable.
- Do not drop the cube on hard floors.
- Store it assembled.
Mini FAQ
Is it broken if pieces fall out often? The tension is too loose.
Can I solve it with a missing piece? No.
Do I need glue? Never — glue ruins the mechanism.
Next: disassembly guide and maintenance.
Related articles
How to take a cube apart and reassemble it
Step by step: popping an edge at 45 degrees, disassembling without breaking the core, and reassembling so the cube is solvable again.
How to lubricate a cube (and not ruin it)
Which lubricant to use, how many drops, how to set tension, and what to do if the cube becomes too slippery or starts to squeak.
Cube care: cleaning, storing, replacing
How to keep a speedcube in shape: routine cleaning, sticker care, storage rules and the signs it is time for a new cube.