Step 6. Last layer corners
Putting the four corners in their correct positions while ignoring the yellow stickers. One three-cycle formula and the front-right rule.
Corner three-cycle
Goal: all four top-layer corners are in their correct positions. The yellow stickers may point anywhere — orientation is step 7.
How to tell a corner is in place
Look at a corner’s three colours. It is in place if those colours match the three centres around it.
For example, the yellow-green-red corner belongs between the yellow, green and red centres. Whether the stickers face up or sideways does not matter in this step.
The formula
U R U' L' U R' U' L
It keeps the front-right corner fixed and cycles the other three corners. Edges are untouched, so the yellow cross stays aligned.
How to apply
- Find a corner that is already in place. It may be twisted — that is fine.
- Turn the cube so that corner is at the front-right (top layer, closest to you).
- Apply the formula. Three corners cycle.
- Check again: if not all four are in place, find the correct one, put it front-right and repeat.
One or two applications are typical. If no corner is in place, apply the formula once from any position — a correct corner will appear.
Check
- All four top corners sit between their own centres.
- The yellow cross is still aligned.
- Corners may be twisted.
Common mistakes
- Holding the correct corner somewhere else. The formula preserves the front-right position.
- Trying to orient corners now. This step is about position only.
- Rotating the cube between applications. Keep it still and adjust with U.
- Mixing up
LandL'. The formula is symmetric:U R U', thenL' U R' U' L.
Mini FAQ
A corner is in place but twisted — does it count? Yes for this step. It gets oriented in step 7.
What if two corners are in place and two are not? That cannot happen: either one is correct (and three cycle) or none are. Re-check whether the corners really match the centres.
Can I use a different formula? Yes, but this is the shortest safe option for beginners and it does not touch the cross.
Diagrams
Move by move: