How to solve a 3×3 Rubik's Cube
Beginner method in 7 steps: from a scrambled cube to your first solve, with formulas, diagrams, troubleshooting and a practice plan.
Where to start
A 3×3 looks impossible until you break the solve into stages. The beginner method — often called layer by layer — solves the cube one layer at a time: white cross, first-layer corners, middle layer, then the yellow side. You only need four formulas, not hundreds of algorithms.
The first solve takes 5–10 minutes and usually comes with mistakes. That is normal. What matters is understanding each stage, not speed.
What you need
- A working 3×3. It does not have to be expensive — any cube that turns without jamming.
- 30–40 minutes for the first solve and some patience.
- Basic notation:
Ris the right face,Uthe top,Fthe front; an apostrophe'means counter-clockwise and2means a half turn. Full notation.
The seven steps
| Step | Task | What you need |
|---|---|---|
| 1. White cross | Four white edges around the white centre | Knowing which colour is on the side of an edge |
| 2. First layer corners | Four white corners in place | Three short formulas |
| 3. Middle layer | Four middle-layer edges | Two “snake” formulas |
| 4. Yellow cross | A cross on the top face | One formula, four cases |
| 5. Last layer edges | Edges aligned with the centres | Sune: R U R' U R U2 R' |
| 6. Last layer corners | Corners in their positions | A three-cycle formula |
| 7. Corner orientation | Yellow stickers up | R' D' R D |
What progress looks like
- Cross — a white plus on the bottom, side colours matching the centres.
- First layer — a solid white face at the bottom.
- Two layers — two matching rows on every side.
- Yellow cross — a plus on the top face.
- Edges — the plus is rotated correctly.
- Corners — all four corners sit between their centres.
- Solved — every face is one colour.
If a previous stage breaks, check the orientation first: white down, yellow up.
How long it takes
- First solve — 5–10 minutes with the guide.
- After 5–10 solves — 2–3 minutes.
- After a month of practice — about a minute.
- With CFOP — 30–40 seconds or faster.
A one-week plan
- Days 1–2. Cross and first layer. Solve five times, explaining to yourself why each piece went where it did.
- Days 3–4. Add the middle layer. Solve through steps 1–3 without touching the yellow side.
- Days 5–6. Yellow cross and edges. Drill Sune.
- Day 7. Corners and the full solve. Time yourself once — that is your baseline.
Common questions
Can I start with a colour other than white? Yes, the method is colour-independent. White is just less confusing at first.
A formula does not work. Why? In most cases the cube is oriented differently or a prime is missing. Re-read the step and reset the orientation.
Do I need to memorise everything at once? No. Learn one formula per step. Keeping the page open is fine.
Solved except one corner — did I fail? On a healthy cube that is impossible: either the corner is physically twisted (the cube was taken apart) or you lost track in step 6.
What next
When the beginner method becomes automatic, move to CFOP: it solves the first two layers together (F2L) and finishes the last layer with OLL and PLL. Start with Cross and F2L; the timer tracks progress.
Diagrams
Move by move: