Reduction: solving 6×6 and 7×7
The reduction method for big cubes: centres, edges, the 3x3 stage and where parity fits. One approach that scales to any size.
The idea
Every big cube is solved by reduction: turn it into a 3×3, then use a normal method.
Reduction has three steps, always in the same order:
- Centres — build the middle block of every face.
- Edges — join the pieces of each edge into one unit.
- 3×3 stage — solve with any 3×3 method.
Step 1. Centres
| Cube | Centre block | Practical approach |
|---|---|---|
| 6×6 | 4×4 | 1×4 strips |
| 7×7 | 5×5 | 1×5 strips |
Rules that hold on every big cube:
- Build the first centre completely, then the opposite one.
- Keep finished centres out of the working area.
- Work in strips: a strip survives wide turns much better than a single piece.
- Check the colour scheme before finishing.
Step 2. Edges
Count the pieces per edge: 6×6 has four, 7×7 has five. Pair them one edge at a time.
- Bring two matching pieces together with a wide turn.
- Add the remaining pieces.
- Restore the centres with the reverse turn.
- Park the finished edge away from the working area.
The last two edges are the classic difficulty; the flip formula from 5×5 fixes them.
Step 3. The 3×3 stage
Once centres and edges are done, the cube is a “big 3×3”: solve it with the beginner method or CFOP.
Where parity fits
| Cube | Parity |
|---|---|
| 4×4, 6×6 | OLL and PLL parity can appear |
| 5×5, 7×7 | no parity |
Parity is fixed after reduction, on the last layer:
OLL parity: Rw U2 x Rw U2 Rw U2 Rw' U2 Lw U2 Rw' U2 Rw U2 Rw' U2 Rw'
PLL parity: r2 U2 r2 Uw2 r2 Uw2
Common mistakes
- Building centres piece by piece. Strips are faster and more stable.
- Ignoring the scheme. On even cubes it is easy to swap opposite colours.
- Fixing parity too early. It belongs to the last layer.
- Rushing the last two edges. This is where most time is lost.
Mini FAQ
Is reduction the only method? It is the standard one; other approaches exist but are niche.
Does it scale to 9×9? Yes — the same three steps, just longer.
Which cube to learn first? 5×5 (no parity), then 4×4, then 6×6 and 7×7.